• James@vsi-engineering.com
  • 0909233419
VSI
5/2-directional valve, Series CD04
5/2 Qn = 900 l/min Pilot valve width : 26 mm Pipe connection Compressed air connection output : M10x1 Electrical connection : Plug, EN 175301-803, form B, 3-pin Manual override : with detent double solenoid Pilot : Internal
Version  Spool valve, positive overlapping
Activation  Electrically
Pilot  Internal
Sealing principle  Soft sealing
Working pressure min./max.  2 ... 10 bar
Control pressure min./max.  2 ... 10 bar
Ambient temperature min./max.  -15 ... 50 °C
Medium temperature min./max.  -15 ... 50 °C
Medium  Compressed air
Max. particle size  50 µm
Oil content of compressed air  0 ... 1 mg/m³
Nominal flow Qn  900 l/min
Nominal flow 1 ▶ 2  900 l/min
Nominal flow 2 ▶ 3  900 l/min
Pilot control exhaust  with directional pilot air exhaust
Connector standard  EN 175301-803:2006
Protection class with connection  IP65
Compatibility index  14
Duty cycle  100 %
Mounting on manifold strip  P-strip
Weight  See table below

 

The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).

 

Material
Housing  Die cast zinc Polyamide fiber-glass reinforced
Seals  Acrylonitrile butadiene rubber

VSI-ENGINEERING CO., LTD
Office: 58/4 Nguyen Van Mai Street, Ward 4, Tan Binh District, HCM City
Tel: (+84 8) 6261 7130 Fax: +(84.8) 6257 2725
Email: James@vsi-engineering.com
Hot line: +84909.233.419 ( Mr. Khiem)